24/7 channel output
Keep a station or channel feed connected to its configured streaming infrastructure.
MultiEncoder
Encode once. Deliver every signal where it needs to go.
Turn a live audio or video source into the configured outputs your operation requires. Manage multiple destinations, protocols and stream profiles from one controlled workflow.
- Audio and video workflows
- Multiple simultaneous destinations
MultiEncoder · Main outputDistribution control
Encoding
Program inputACTIVE
VIDEO 01
SourceProgram feed
Video1920 × 1080
AudioStereo
Active outputs5 / 5 CONNECTED
Primary streaming serverRTMP · Main profile
Live
Web and mobile deliveryHLS · Adaptive output
Live
Remote contributionSRT · Secure transport
Live
Production returnRTSP · Local network
Live
Low-latency monitorWebRTC · Control room
Live
Profiles running normally
Connection monitoring active
5 destinations
Multi-destination
Independent profiles
Live monitoring
Remote control
A distribution layer for broadcasters
One source should not mean one destination.
MultiEncoder receives the program signal, prepares the required stream profiles and sends each one through the appropriate delivery protocol. The workflow remains visible and manageable from source to destination.
Use the right inputStart with the audio, video or network source selected for the operation.
Build each outputConfigure the profile and protocol required by every destination.
See every routeMonitor which outputs are active and where the signal is being delivered.
Built for real signal paths
Configure the workflow around the operation—not the other way around.
Use MultiEncoder for continuous channels, event feeds, remote contribution, internal monitoring and multi-platform distribution.
Multiple destinations
Prepare several simultaneous routes from the same live source without operating separate tools.
Audio and video
Handle radio-only signals, visual radio output and complete multimedia program feeds.
Destination-specific output
Apply the stream profile needed by each server, platform, return feed or player workflow.
Remote signal transport
Move a live feed between studios, production sites and receiving systems through suitable network protocols.
WebApp operation
Review and control the encoding workflow remotely from a responsive browser interface.
End-to-end signal flow
From the program output to every connected audience.
Each stage has a clear role: receive the signal, prepare the profiles, encode, route and monitor.
01
Capture source
Audio, video or supported network input.
02
Set profiles
Define the output required for each route.
03
Encode
Prepare the live media for transport.
04
Route
Send each stream through its protocol.
05
Monitor
Keep the active signal path visible.
Protocol flexibility
Use the transport that matches each part of the workflow.
Public delivery, contribution, production returns and low-latency monitoring do not all require the same protocol. MultiEncoder lets the operation assign the appropriate route to each destination.
Output profilesPer-destination configuration
Main HDWebMobileContribution
ProtocolRTMP
Video profile1920 × 1080
Frame rate30 fps
AudioStereo
DestinationPrimary streaming endpoint
Current outputStable
CONNECTED
Independent stream profiles
Prepare each output for its actual destination.
A web player, a contribution receiver and a platform publishing endpoint may need different settings. Keep those configurations together while maintaining a clear relationship to the original program signal.
- Per-route settingsKeep the protocol and profile tied to its intended destination.
- Reusable configurationMaintain named outputs for recurring channels and workflows.
- Clear statusIdentify which output is connected, active or waiting.
Audio processingSTREAM OUTPUT
PresetEnhanced
Level controlBalanced program level
CompressionControlled dynamic range
Output limiterFinal peak protection
INPUT -9.4 dBOUTPUT -7.8 dB
Consistent streaming audio
Shape the program sound before it leaves the encoder.
Use configurable processing to control level, dynamic range and output peaks for the streaming signal. Presets provide a practical starting point for different program styles.
NormalBalanced everyday operation
EnhancedMore present streaming sound
SmoothGentler dynamic behavior
SafeConservative output control
Operational visibility
Know what is connected before the audience notices a problem.
Keep the source, profiles and destinations visible in one status view, whether the operator is in the studio or using the WebApp remotely.
Input status
Confirm that the expected audio or video source is present and active.
Profile activity
Review the configured output and the current encoding state for each route.
Destination status
See which server or receiving system is connected to the encoder.
Remote operation
Use the browser-based control surface to review and manage the workflow.
CLOSE RadioTV ecosystem
Connect production, playout and distribution.
MultiEncoder can sit after the visual production output or mediaTV playout, preparing the final live signal for the connected streaming and contribution destinations.
Map your destinations
Design the encoding workflow around your real signal path.
Review your source, stream profiles, protocols, destinations and remote-control requirements with a CLOSE RadioTV specialist.